Automatic RFID Card Dispenser For Car Parking Access Control System

Automatic RFID Card Dispenser For Car Parking Access Control System

Main Features

♦ Industrial design, adjust to high temperature and other bad environments
♦ Simulated manpower friction card issuers ,better adaptability to various deformed cards
♦ Watchdog of hardware and embedded operating system to ensure properly running
♦ Pre-dispense function accelerate dispensing speed
♦ Connectable with the vehicle detector to achieve card issuing and "one car, one card"
♦ Automatic buzzer alarm when no cards, fewer cards or failure
♦ Automatic buzzer alarm when errors occur, automatic reset after 100 seconds alarm
♦ Capacity of card stacker is more than 40pcs, automatic buzzer alarm when the withdrawing stacker is full
♦ Slide card stacker with a capacity of 40pcs
♦ Adjustable of card stacker with a capacity of 120pc each
♦ Automatic withdrawal to prevent card lost (only for TCD800F series)
♦ Slide design to make installation and disassembling easier
♦ Molded production to ensure high consistency of precision and quality

Technical Data

♦ Power Supply: 24VDC
♦ MAX Current : 2A
♦ Static Current: 0.1A
♦ Working Temperature: -30℃ to 70℃
♦ Working Relative Humidity: 30-90% 
♦ Working Condition: Installed In Bin 
♦ Card Width: 54 ± 0.5 mm
♦ Card Length: 85 ± 0.5 mm
♦ Card Thickness: 0.2-2.4 mm(adjusted)(Default 0.8mm)
♦ Capacity of Card: 150pcs (0.8mm), 120pcs More with an extra stacker
♦ Card Material:Paper and Polyester Cards.
♦ Net Weight: 2.0Kg(Including Card Block)
♦ Dispensing Time: Approx. 0.5S
♦ Card Collection: No
♦ Card Box Height:150mm
♦ Interface Mode: Low Level I/O RS 232
♦ Dimension: 270*78*228mm

Card Loading Processing

◊ Open the unit
→ Remove the power
→ Take out the pressure block
→ Put card into the unit
→ The press block should be put at last
→ Check the dispenser transportation machine and make sure the safety
→ On power
→ Close the unit

Work Condition Indication

Product Display

Production

Testing

Package